Dymo LabelManager 100Plus Manuel d'utilisateur télécharger pdf (Page 4)

CAPITALS

• Press this button, and all subsequent cha-

racters will appear in UPPER CASE

(CAPITALS), as confirmed by the CAPS

indicator in the display.

• Press again to cancel and return to lower

case.

SHIFT KEY

This has a dual action: either press and hold

down or press and release to remain in

"shift" position"

Press H again to return to normal state.

• Use H before pressing an alphabet key to

produce an UPPER CASE (CAPS) character.

• For dual-purpose keys, press H first to

produce the legend above the key.

• Pressing H while CAPS is set will give a

lower case character.

DELETE

• Press to delete the character to the left of

the cursor, or to exit certain function key

operations.

CLEAR ALL TEXT +

• Press to clear all the current text and

cancel any fixed length setting, but leave

the text size and other settings unchanged.

Also use to exit or clear certain function

key operations.

CURSOR KEYS

• Press to move the cursor along the text,

one character at a time.

• Press and hold to scan quickly through

the text.

• Press H +  or  to move the cursor

to the beginning or end of the text.

• When used in conjunction with certain

function keys, use  or  to select

options.

• To insert characters into the text, use  or 

to position the cursor under the

character to the right of the insertion

point, then type in the characters required.

PRINTING

• Press PRINT to print the label.

(see extended memory)

• Use cutter button E to release the label –

see page 2.

PRINT PREVIEW +

Allows you to preview your selected label

before printing it.

• Press H + CAPS and the entire text of the

selected label will scroll across the display.

Note: with a 2 line label, the message will

be previewed as a single line message.

BUFFER PREVIEW +

• Press ---ll--- and the entire content of the

label storage buffer will scroll across the

display. (see extended memory)

Note: any 2-line label in the buffer will be

previewed as a single line message.

SPACE KEY

• Press SPACE to insert a space into the text.

SYMBOLS +

• Press H + SPACE to select a symbol character

– see Symbols and special characters

and the symbols table on page 2.

TEXT SIZE

• Press SIZE to display the six text print sizes:

l condensed full height

ı condensed half-height

normal full height

STEP THREE - switch on

Switch on with the ON/OFF switch.

Note: the LabelMANAGER 100+ switches off

automatically after two minutes if no keys are

pressed.

STEP FOUR - type a label

• Type a simple first label to try the

machine. Learn more about formatting in

the following pages.

STEP FIVE - print your label

• Press to print the label.

STEP SIX - cut the label

• Use cutter button E to cut the label –

see page 2.

Congratulations! You’ve printed your first

label!

Let’s go on to learn more about typing

and formatting.

Getting to know your

LabelMANAGER 100+

The Display

The display shows:

• Up to eleven text characters, at one time.

Use  or  to move along the text.

• 8 indicators – as shown below.

• The display will flash if you press

an incorrect key in a function sequence.

Function keys

ON/OFF

Switches the power on and off.

• Switches off automatically after two minutes

if no keys are pressed. The last label created

will be retained and displayed when next

turned on. Any stored last label settings

will also be retained.

Note: If the batteries are removed for more

than a few seconds, all text and settings will

be lost.

When power is restored, the display will

show a flashing cursor (no text) and the set-

tings will be full height standard width text

with H and all other settings off.

UNDLINE ITALIC LTH SET OUTLINE

CAPS VERT

LM100 + N-EU.qxd 14-09-2001 14:09 Pagina 4

1 2 3 4 5 6 7 8 9 ... 25 26

Commentaires sur ces manuels

Pas de commentaire

Dymo LabelManager 100Plus Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Dymo LabelManager 100Plus